Morris Minor Owners Club

Thanks for your replies, I will let you know how I get on.

My Traveller has Clutch Judder at times, it is worse when reversing. I have checked all the engine and G/box mounts and found them all to be ok. The cable that goes from the G/box to the G/box support is also ok. Before I take the gearbox out and check the clutch has anyone got any other ideas.

I recently replied to a wanted advert for a G/box side plate, as I had a spare one I thought that £5-00 inc postage was about right and so did the the guy who wanted it. The plate was well packed with both senders and recipients addresses clearly printed. It turned out that the postage was £2.65 fir...

I started this project back in June and was hoping to have it back on the road for Christmas, well here it is. Still needs a little work and a dab of paint here and there but things are coming together nicely. I started by completely stripping the car down to the so that I could check exactly how mu...

I have 4 spare windscreens and as I was cleaning them in order to find a good one for the next project I find that 2 are 0.250" thick and the other 2 are 0.195" thick. Can anyone tell me why this is as they were all taken from MM,s of one type or another.

I had the same problem with mine. What I did was to fit a bolt to the upper part of the O/S door and the plane the N/S door edge till it closed correctly. I left about a 2,0mm gap between the doors to alow for any expansion through damp.
This resulted ii well fitting doors and no rattles.

Thanks for the info I will take your advice and see what turns up.

Ive decided to take the plunge and restore this rather sad 1963 two door and turn it into a Tourer. m at the rust assessment stage at the moment and there is plenty of it. I will not be able to carry out the conversation until all of the bad areas are made good and then sort out the strengthening of...

I HAVE JUST STARTED TO RESTORE THIS 1963 TWO DOOR SALOON AND AM LOOKING IF THERE IS ANYONE OUT THERE THAT MAY HAVE OWNED IT PREVIOUSLY [frame][/frame]

Done that and the pic title shows up in the box "Upload Picture" when preview pressed the green bar fills up and then te screen goes blank

Thanks for the info, have tried again but when I download a pic and press preview the green bar fills up and then the screen goes blank.

Sorry about this folks, but I seem to be having problems with adding a pic perhaps I should enlist the help of my 6yr old grandaughter. Will try once more. Still no go, have done as advised and selected pic & ten pressed Preview. Green bar at th bottom shows that loading is taking place then whe...

I tried to attach a picture but for somereason it was not accepted. I have just tried again perhaps I need edumakating in the finer arts ofthis yer comptor.

I have recently bought a tourer that I found to have an Ital engine fitted. It is my intention to fit his engine and the gearbox into my Traveller. One of the things that I have found is that the engine back plate is badly cracked (see pic) any suggestions as to why this has happened will be welcome...

There is so much rust it is of no use, thats why I bought it, hoping to restore it. I have saved many parts

I have just purchased a scrapper Tourer that was fitted with what I believe to be an Ital engine. I am considering putting it into my Traveller. I am not sure yet as to what g/box is attached, that should become clear when I get round to cleaning it all up. Any advice relavent to this engine and its...

Can anyone please tell me if there is any information available on the dates that engines were manufactured using the engine number as referance.

Can anyone please tell me if there is any information relating to the engine number available that will tell you the date that an egine was built