Page 1 of 1
Engine Identification
Posted: Sat Apr 19, 2025 9:08 pm
by Jaybeee1
Hi all MMOC members
I have picked up a 1275 engine for my Morris Minor and I am struggling to find exactly what the engine is from. From what I can see I have a 1275 A+ engine but not sure if it is Marina/Ital or an MG engine. Distributor is a "Y" clamp, Extra Ribbing on block by distributer, Six bolt crank/flywheel and possibly what should be the easiest to workout what’s what the Engine Number "12V96ELGO24752".
I have searched the internet and on the forum without much success.
Thanks in advance
Jason
Re: Engine Identification
Posted: Sat Apr 19, 2025 9:24 pm
by les
This is an Ital block, the oil filter is in a different location than the Midget.

- IMG_2840.jpeg (416.47 KiB) Viewed 4434 times
Re: Engine Identification
Posted: Sat Apr 19, 2025 9:33 pm
by svenedin
Phill might know from the engine number but like you I cannot find anything on the internet to narrow things down. 12 is 1275 and V is for vertical or inline but you knew that already. The numbers/letter like 12V and 12H were used after about 1970 to denote vertical or horizontal. Some photographs would help. If you edit the photo, say by cropping a little bit, then the photos will upload the right way up. Otherwise they tend to end up sideways. MG Midget would be 12CC or 12 CE or after 1972 12V/586F according to this list:
https://www.mginfo.co.uk/upgrades4mgs/f ... umbers.pdf
Stephen
Re: Engine Identification
Posted: Sat Apr 19, 2025 10:51 pm
by Jaybeee1
So, is this an Ital block? When you say it's in a different position mine looks in a similar to the photo you have attached what do you think? It’s not a great photo I’m afraid.
les wrote: ↑Sat Apr 19, 2025 9:24 pm
This is an Ital block, the oil filter is in a different location than the Midget.
IMG_2840.jpeg
Re: Engine Identification
Posted: Sat Apr 19, 2025 10:52 pm
by Jaybeee1
I found the attachments tab now!

- 20250411_143713.jpg (1.64 MiB) Viewed 4412 times

- 20250411_143832.jpg (1.77 MiB) Viewed 4412 times
Re: Engine Identification
Posted: Sun Apr 20, 2025 7:06 am
by philthehill
The engine in question is a 1275cc 'A' Plus engine as originally fitted to a Morris/BL Ital.
Re: Engine Identification
Posted: Sun Apr 20, 2025 2:07 pm
by Jaybeee1
Many thanks Phil
Have a great Easter.
Jason
philthehill wrote: ↑Sun Apr 20, 2025 7:06 am
The engine in question is a 1275cc 'A' Plus engine as originally fitted to a Morris/BL Ital.