Anyone had trouble with B&B clutch mine is giving me trouble,the pedal is very hard,the car has only done a few thousand miles.I s any other make available?
1098 engine
stiff clutch
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
- Minor Friendly
- Posts: 25
- Joined: Thu Jun 20, 2019 9:20 pm
- MMOC Member: No
Re: stiff clutch
Is this a new clutch, and was it OK with the old one? A typical cause of a heavy clutch is a worn/binding pedal and linkage and/or a pedal return spring that is too short/heavy' but a bit of history will help with diagnosis.
-
- Minor Friendly
- Posts: 25
- Joined: Thu Jun 20, 2019 9:20 pm
- MMOC Member: No
stiff clutch
I am going to remove engine to check,its an easy job and then I can check clulch out and put my mind at rest.
All the linkage and pedal bits are good,I removed clutch pedal and cleaned it up and greased it all when I fitted new M/Cyl to brakes
All the linkage and pedal bits are good,I removed clutch pedal and cleaned it up and greased it all when I fitted new M/Cyl to brakes
-
- Minor Friendly
- Posts: 25
- Joined: Thu Jun 20, 2019 9:20 pm
- MMOC Member: No
Re: stiff clutch
Have removed motor and stripped clutch,found a small spring had come off the the clutch cover operating mechanism,it was a bit bent up so I guess it had been caught up somewhere.Luckily still have old clutch cover so swapped spring over.Reassembled and refitted,appears to be OK
Re: stiff clutch
Excellent, well done, and thanks for reporting back, it's always good to know a resolution, and very helpful for anyone else with the same problem 
