How to differentiate between the springs

Discuss mechanical problems here.
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
Post Reply
SriVik
Minor Friendly
Posts: 87
Joined: Sun Feb 09, 2020 12:28 pm
MMOC Member: No

How to differentiate between the springs

Post by SriVik »

Is there any ways to differentiate the three springs Throttle, brake and clutch spring?.

The hook, length or the tension ??
Attachments
972439C2-851C-4BF7-8F51-63355F6E7032.jpeg
972439C2-851C-4BF7-8F51-63355F6E7032.jpeg (157.01 KiB) Viewed 488 times
philthehill
Minor Maniac
Posts: 11577
Joined: Thu Jul 19, 2012 12:05 pm
Location: Hampshire
MMOC Member: Yes

Re: How to differentiate between the springs

Post by philthehill »

I would go by the strength of the spring.
The weakest will be the throttle return spring. Pt No: 1E5537.
The middle strength will be the brake pedal return spring . Pt No: AAA599
The strongest will be the clutch pedal return spring. The one attached to the rear engine plate. Pt No: AAA1628.

All part numbers are from the MOSS Europe Minor parts list.

SriVik
Minor Friendly
Posts: 87
Joined: Sun Feb 09, 2020 12:28 pm
MMOC Member: No

Re: How to differentiate between the springs

Post by SriVik »

Thanks for the good info.

Additional Infos from another group, just for sharing,

Brake return spring - the hooks are set at 90 degrees to each other, not parallel.. c
Post Reply