Morris Minor Owners Club

Hey folks, this will be a daft question to anyone that knows the answer but could you tell me if the Morris minor 1098 manifold is the same as a mini manifold.
Also what manifold combo are you guys running when you upgrade to hif 38 carb?

Regards
John

Here's how I did it. I've got a HS4 fitted but the 38 will go straight on

http://www.mmoc.org.uk/viewtopic.php?f=4&t=65267

I had a Mini 1100 combined manifold on for a while before I fitted the alloy inlet and Midget exhaust manifold.

Nice one! As a temporary measure I suppose if you didn't mind killing a manifold you could cut the inlet part off the exhaust part. Would be a bit ruff but should work.
Not pretty

From memory, the Mini manifold that is similar to the Minor but takes a 38mm/1.5 inch carb has a part number cast in like "12A787". The 787 bit always stuck in my mind.


Edit. Found it...12G787
https://www.google.co.uk/search?q=12a78 ... 7+manifold

You certainly could but be careful where you cut, you don't want to chop into the divide.

RobThomas wrote:From memory, the Mini manifold that is similar to the Minor but takes a 38mm/1.5 inch carb has a part number cast in like "12A787". The 787 bit always stuck in my mind.


Edit. Found it...12G787
https://www.google.co.uk/search?q=12a78 ... 7+manifold

And the standard Minor exhaust will fit straight on, very restrictive though if using a 12G940 head and 1 1/2" carb

Yeah I thought it would be restrictive, I've got a 40 dcoe and inlet manifold kicking around also but reckon would be too much for this little lady! But would be better with a lcb exhaust manifold free flowing and the hif carb

The LCB will be good with the MG cam but not so good with the standard one I'm told.