Page 1 of 1
1954 morris minor
Posted: Sat Oct 01, 2011 11:26 am
by clarissa
I would welcome some advice! I am not particularly mechanically minded but have carried out a few restorations projects with the help of friends who are. I have just bought a 1954 morris minor saloon to restore and am hoping to use parts from a 1965 morris i already own and use as a 'donor' car. Could anyone tell me whether the parts will be compatible? Thanks.
Re: 1954 morris minor
Posted: Sat Oct 01, 2011 12:27 pm
by Neil MG
Most of the parts will fit, although it will look like a bit of a hybrid. Some things will need to be matched or changed as a "system" like rear axle/speedo, engine/gearbox (floor and carpet for gearbox). The interior trim looks very different but is mostly interchangeable. Things that cannot be swapped (without a lot of work!) are front and rear screens, bonnet, headlining and not sure about some dashboard parts. The wiring will need some small changes depending on what parts you swap (indicators, starter etc)
You will get lots more information from the others on here...
Re: 1954 morris minor
Posted: Sat Oct 01, 2011 1:31 pm
by ASL642
2dr saloon doors/interior door trim will not fit a 4dr saloon. Different sizes.
