Page 1 of 1
front dampers
Posted: Sun Sep 18, 2011 9:21 pm
by PAULJ
Hi all These are the front dampers on my van. I have seen a lot of vans with the bonnet up but have not seen any like this. Are they original ?
[frame]
[/frame][frame]
[/frame]
Re: front dampers
Posted: Thu Feb 16, 2012 8:37 pm
by PAULJ
Thought I would give this another go. Can anyone identify the dampers on my van. They come through the inner wing as well with a large cap that has a screw driver slot about 2"
Anyone ??
Please
Re: front dampers
Posted: Thu Feb 16, 2012 9:33 pm
by bmcecosse
Most interesting! Not seen anything like these before..... Any identification marks on them ???
Re: front dampers
Posted: Thu Feb 16, 2012 9:57 pm
by PAULJ
Well I thought if anyone would know it would be you and as you dont pritty much answers the question. No markings. Ill get some better photos tomorrow as the wings are off at the moment
Re: front dampers
Posted: Thu Feb 16, 2012 10:56 pm
by bmcecosse
More pics would be good - are they held on with the normal 4 bolts into the crossmember? Are the usual two 'unused' bolt holes still there in the crossmember?
Re: front dampers
Posted: Fri Feb 17, 2012 11:19 am
by ian.mcdougall
There seems to be extra mounting bolts into the inner wings and an adapted inner wing I think
Re: front dampers
Posted: Fri Feb 17, 2012 6:50 pm
by PAULJ
They are mounted the same as moggy. Its not extra mounts on the inner wing, it goes through the inner wing[frame]
[/frame][frame]
[/frame]
Re: front dampers
Posted: Fri Feb 17, 2012 7:06 pm
by ian.mcdougall
It looks like the pistons are horizontally opposed and has a resevoir at the top that can be filled via the top cap. Is there something stamped in the top cap
Re: front dampers
Posted: Fri Feb 17, 2012 7:28 pm
by bmcecosse
These are amazing...... and yet they carry the same top arm as we are used to.
Re: front dampers
Posted: Fri Feb 17, 2012 7:39 pm
by MarkyB
How big is the actual filler under that enormous cap?
Re: front dampers
Posted: Fri Feb 17, 2012 7:55 pm
by PAULJ
Ive done nothing with them just thought they were odd and hoped someone would know what they are
Re: front dampers
Posted: Sat Feb 18, 2012 7:47 am
by RobThomas
BMC. Didn't we chat about some 'adapted' dampers a few weeks ago? I recalled that someone had previously mentioned some cars having oddball dampers fitted.
Any idea of the build date of the vehicle and history?
Re: front dampers
Posted: Sat Feb 18, 2012 4:28 pm
by bmcecosse
I've always hoped to find some larger dampers for the front - perhaps using the alternative mounting holes - but until these ones I have never seen anything other than the normal units. At the rear - it appears that MGB dampers probably have larger capacity - but the same mounting hole dimensions..... I turned down the chance to purchase a pair a while back - mainly because I felt with post they were a bit expensive. If I find a set locally - I will be having them!