Page 1 of 1
twin carb in 1098
Posted: Mon Sep 12, 2011 11:12 am
by gjauto
Hi
I want put twin carburettor in morris minor 1098 1968
does anyone know where can I get kit from?
thankyou
Re: twin carb in 1098
Posted: Mon Sep 12, 2011 11:53 am
by bmcecosse
It's a poor idea - if you want better performance, fit the single larger HS4 or later HIF38 carb from a Mini, complete with in let manifold. It bolts straight on and will give a few extra BHP for little cost. For any real performance increase - the cylinder head needs improving.
Re: twin carb in 1098
Posted: Mon Sep 12, 2011 12:31 pm
by gjauto
it's not poor idea, my morris minor have few modification like 5 speed gearbox upgrade suspension.
I need just little more performance.
where can i get one from?
thankyou
Re: twin carb in 1098
Posted: Mon Sep 12, 2011 12:55 pm
by bmcecosse
Twin carbs will give very little extra performance - as I said above - to get worthwhile extra BHP you need to change the cylinder head - and still a big single carb is much better than the small twins. I know - I've been doing this for almost 50 years ! Read Mr Vizard's book if you still don't believe me.
But - here you go -
http://www.sucarb.co.uk/ProductDetail.a ... 1&id=34047 and you will also need an exhaust manifold and a new system..... so budget ~£200/300 for that. It's such a waste of money.........
Re: twin carb in 1098
Posted: Mon Sep 12, 2011 1:27 pm
by gjauto
ok, if you say so, i will go with mini carb, i will look up for one
Re: twin carb in 1098
Posted: Mon Sep 12, 2011 1:44 pm
by bmcecosse
Where are you ? There are always plenty on ebay. This one is ideal.....
http://www.ebay.co.uk/itm/HS4-Carb-Mini ... 4aae95ddf7
Re: twin carb in 1098
Posted: Mon Sep 12, 2011 1:51 pm
by mike.perry
An HS4 or HIF 38 is quite adequate for 1098 but to get any benefit from the bigger carb you will need a decent LCB system to get the exhaust out. Also you will not have the tuning and balancing problems of setting up twins
Re: twin carb in 1098
Posted: Mon Sep 12, 2011 1:55 pm
by bmcecosse
For an otherwise standard 1098 engine - the standard exhaust manifold and system is fine.
Re: twin carb in 1098
Posted: Mon Sep 12, 2011 2:25 pm
by gjauto
thank you, i found this one on ebay with maniflod do you think fit it will fit straight to the head
http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... 500wt_1156
Re: twin carb in 1098
Posted: Mon Sep 12, 2011 5:25 pm
by bmcecosse
The one shown in the picture should be ok - the other one on Oselli manifold - won't fit without some work - but of course you only want one..... So bid away - but the price may rise, since it is for two items.