Page 1 of 1
1966 Morris |Minor 1098 Heater
Posted: Sat Jan 08, 2011 1:13 pm
by waterside20
when i start my fan on my heater it makes a noise,it does not seem to be running at full speed what can i do?
Re: 1966 Morris |Minor 1098 Heater
Posted: Sat Jan 08, 2011 1:40 pm
by chrisryder
mine makes a noise sometimes too, especially in colder weather! but in mine is cured by the old trick of 'turning it off and on again'. i don't know what causes it though, sorry!
Re: 1966 Morris |Minor 1098 Heater
Posted: Sat Jan 08, 2011 1:46 pm
by simmitc
What sort of noise? Bearing screech, something catching, knocking, rattling? Whatever it is, it will probably mean removing and stripping the heater assembly to get to the motor. Is it a standard or uprate heater - the uprated mini based ones have extra air intake on the left, and the flaps can sometime "flap"!
Re: 1966 Morris |Minor 1098 Heater
Posted: Sat Jan 08, 2011 3:45 pm
by waterside20
l think it may be the brushes because it sounds like the motor is labouring.Only when it first starts up,l have tried switching it off and on it still does the same.
Could it be a bearing,if so what is the best metheod repair/renew??
It is a standard heater.
Re: 1966 Morris |Minor 1098 Heater
Posted: Sat Jan 08, 2011 4:12 pm
by bmcecosse
Sorry - never stripped one down - they are usually extremely reliable. Remove and investigate!
Re: 1966 Morris |Minor 1098 Heater
Posted: Sat Jan 08, 2011 4:46 pm
by mike.perry
Spray a little lubricant around the motor and fan bearings. My fug stirrer "heater" screaches for a couple of seconds when it is cold
Re: 1966 Morris |Minor 1098 Heater
Posted: Sat Jan 08, 2011 6:28 pm
by waterside20
thanks for that Mike i will give it a go.here is a picture of her .[frame]

[/frame]