Hi
How easy (or hard) is it to replace the glass in the two front doors of a traveller.
I have bought two second hand pieces of glass.
Thanks
Andy
Windows
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
- Minor Legend
- Posts: 4064
- Joined: Tue Dec 07, 2004 8:50 am
- Location: Margate, East Kent
- MMOC Member: No
Re: Windows
It is not that easy, you have to remove the window runners first. To get at these remove the door card and fittings. There are two 1/4 BSF nuts on studs and a nut and bolt that hold the window runners in place. The studs are often very rusty and it can be a struggle to get the nuts off as they can just turn without undoing. Then wind the window up , holding the glass as you do and it should just pull off the top of the regulator.
Why do you need to remove the glass?? Weld splatter??
Why do you need to remove the glass?? Weld splatter??
Cheers John - all comments IMHO
- Come to this years Kent branches Hop rally! http://www.kenthop.co.uk
(check out the East Kent branch website http://www.ekmm.co.uk )


- Come to this years Kent branches Hop rally! http://www.kenthop.co.uk
(check out the East Kent branch website http://www.ekmm.co.uk )

-
- Minor Fan
- Posts: 174
- Joined: Mon Nov 14, 2005 5:14 pm
- Location: Warrington, Cheshire
- MMOC Member: No
Re: Windows
Thanks for the advice.chickenjohn wrote: Why do you need to remove the glass?? Weld splatter??
I'm removing the glass as both pieces of exisiting glass are covered in scratches