Mig welder Clarke 90 en

[oldmod1968]

Hi,

Being lazy here and also try to build on others experience. I am using gas mix and assuming metal is good has anyone welded using the Clarke and can you remember approx settings?

Many thanks

[alex_holden]

It depends on so many different factors, you should really inspect the back of the weld for penetration if at all possible.

[Stig]

I think I generally use the max-1 power setting to get adequate penetration without blowing holes and wire speed around 7/10 if I remember correctly. The thicker chassis sections will probably take full power. That's with gasless operation though.

Best approach is to practise on some scrap of the same thickness first though. + what Alex said.