Page 1 of 1

petrol gauge

Posted: Tue May 11, 2010 10:08 pm
by badobsession
Hi have an interesting thing happening to my petrol gauge
it is reading backwards
reading full when no petrol in and when i put fuel in it shows empty


any idea ......

Re: petrol gauge

Posted: Tue May 11, 2010 10:16 pm
by LordAnthony
I seem to remember someone saying that this can happen when you use a later style fuel sender with an older, golden, speedo/gauge. Or is it the other way round?

Re: petrol gauge

Posted: Tue May 11, 2010 10:23 pm
by mike.perry
What speedo do you have?

Re: petrol gauge

Posted: Tue May 11, 2010 10:41 pm
by badobsession
do not know about the speedo type but it worked ok in my last truck a few years ago
cant say what sender is in the tank but the gauge on the last speedo worked ok

Re: petrol gauge

Posted: Wed May 12, 2010 5:25 pm
by bmcecosse
Is it a 'hot wire' gauge ? In other words -does the needle creep slowly across the dial when you switch on ? If it's the older 'fast moving' needle - then could be worth swapping over the connections on the back of the gauge.

Re: petrol gauge

Posted: Fri May 14, 2010 3:44 pm
by mike.perry
The speedo question is relvent as the later fuel gauges work through a voltage stabiliser

Re: petrol gauge

Posted: Sun May 16, 2010 3:10 pm
by libbor
what ever sender you have just swap it for the other one. it will work ok then.

Re: petrol gauge

Posted: Sun May 16, 2010 3:32 pm
by badobsession
have put £25 of petrol in and the gauge is reading 1/2 so next run out we will see what way it is going
the tank in the truck by the way if a ford and i think the sender is off a minor .