Page 1 of 1
window washer
Posted: Sun Nov 01, 2009 12:45 am
by kjm
on a 1962 948cc minor where do you fit the pump / switch on the dash , my previous later car had it fitted on the row with the choke and lights etc but all the spaces on mine are taken up with the pull start etc
Posted: Sun Nov 01, 2009 1:01 am
by PSL184
There is a special bracket for it to mount under the dash on the drivers side. I might have one so I'll try and get a pic tomorrow for you....
Posted: Sun Nov 01, 2009 1:35 am
by mike.perry
Replace the wiper switch with a light switch and use an electric pump wired in to the headlight terminal.
window washer
Posted: Sun Nov 01, 2009 9:52 pm
by kjm
cheers thanks for your help boys , I may have that bracket in a box of bits and not realise it .

Posted: Sun Nov 01, 2009 11:28 pm
by DAVIDMCCULLOUGH
Yes Kenny I think its there!! It bolts on to the bottom edge of the dash to the left of the steering wheel.
Posted: Sun Nov 01, 2009 11:52 pm
by PSL184
Kenny, this is obviously a heater control but the bracket is the same as the washer pump.....
<br>

<br>
window washers
Posted: Tue Nov 03, 2009 1:25 am
by kjm
thanks boys , i think i have one of those , the picture was a great help , will check 2moro

window washer
Posted: Tue Nov 03, 2009 11:03 pm
by kjm
I found the bracket today, just have to drill it out a bit as the hole is too small to accept the washer push
Posted: Wed Nov 04, 2009 1:08 pm
by stevey
It really coming along now!!
window washer
Posted: Fri Nov 06, 2009 12:15 pm
by kjm
Stephen , its great to be making progress , I try to do some wee job each day to keep up the momentum , going to varnish the new boot floors the previous owner had made , today , the wood looks too nice to paint black . I will try to fit these with bolts and wingnuts for easy renewal.Rebecca and I have painted the floor with smooth black hammerite, I sealed a couple of gaps between floor and gearbox cover with clear silicon , cant find the rubber covers for gearbox fill and steering greasing , must check spares car .
Glad you got voted back on last night,
Kenny

Re: window washer
Posted: Thu Jan 21, 2010 12:49 pm
by kjm
Thanks everyone for your help , this morning I got the washers finished .
