Quarterlights
Posted: Wed Jul 08, 2009 9:48 pm
Please can someone tell me if the quarterlight lock/handle can be replaced, how does the pin it pivots on come out?
Morris Minor Owners Club
Promoting the Preservation and Use of the Postwar Morris Minor
https://board.mmoc.org.uk/
Quarterlights
Page 1 of 1
Posted: Wed Jul 08, 2009 10:03 pm
I need to do my drivers side... so I'll watch this topic with huge amounts of interest.
Posted: Wed Jul 08, 2009 10:47 pm
Sadly, it's not intended to be replaceable!
Either take the glass out and assist the pin from the frame, or remove the riveted end, change the latch and drill/tap the end and loctite a screw in... but personally I'd get another complete quarterlight.
Make sure it's the same - there are 2 types of hinges so 2 different hinge screw locations!
Either take the glass out and assist the pin from the frame, or remove the riveted end, change the latch and drill/tap the end and loctite a screw in... but personally I'd get another complete quarterlight.
Make sure it's the same - there are 2 types of hinges so 2 different hinge screw locations!