Page 1 of 1
What is my 1275 engine out of?
Posted: Mon Jun 15, 2009 4:46 am
by katy
Can anyone tell me year and type of vehicle that engine # 12V/671Z/L8989 came out of.
Would like to get tune-up specs for it, spark plug type, gap, timing, etc.
TIA, Ken
Posted: Tue Jun 16, 2009 1:33 pm
by Stig
If you can post a photo of it I'm sure the eagle-eyed on here will know if it's Midget, Marina, Ital etc. Things like oil filter position and mechanical fuel pump are common identifying features but I'm no expert.
I imagine they all use the same plugs (I use the same in my 1275 Sprite engine as my 1098 Minor) and ignition timing is best set to just avoid pinking rather than use a book figure for 1970's fuels anyway.
Posted: Tue Jun 16, 2009 4:07 pm
by bmcecosse
N9Y plugs with 25 thou gap - - 15 thou ignition points gap - - start at 5 degrees BTDC - then adjust forward till it pinks - then retard slghtly. Simples !!
Posted: Tue Jun 16, 2009 8:16 pm
by MColes
The pdf I got tells me it's from a Sprite Mk4/ MG Midget Mk3 after October 1972.
It says that your engine was built for the N. American Market. Would that be right?
Posted: Wed Jun 17, 2009 3:05 pm
by katy
Thanks for the info on the engine.
"It says that your engine was built for the N. American Market. Would that be right?"
That's correct. As far as I know the Morris has been in Canada all it's life. The engine may have come from either Canada or the US. The people we purchased the car from had owned it about 15 years, but didn't know much about it's previous history.
