Page 1 of 1
another indicator question
Posted: Thu Nov 20, 2008 7:58 pm
by luridhue
Is the relay unit for the indicators a single relay or are there two of them? The right indicators are fine but the left is very fast, not quite legal fast in fact. Do both indicators come from the same relay unit or are there two separate ones?
Posted: Thu Nov 20, 2008 8:22 pm
by Bazzalucas
I have a single relay, but a separate "black box" to split the rear indicators from the brake lights.
Posted: Thu Nov 20, 2008 8:36 pm
by PSL184
Single flasher unit only - Check the bulbs for correct voltage / wattage and for bad connections. These will effect the flash rate as the flasher unit works on load.
Posted: Fri Nov 21, 2008 10:35 am
by Luxobarge
PSL184 wrote:Single flasher unit only - Check the bulbs for correct voltage / wattage and for bad connections. These will effect the flash rate as the flasher unit works on load.
^^^WHS^^^
Seconded.
Posted: Fri Nov 21, 2008 1:52 pm
by luridhue
I will have an investigation! Thanks
(considering I studied Electronics it should probably have twigged but that was a few years ago now!)