another indicator question

Post by **luridhue** » Thu Nov 20, 2008 7:58 pm

Is the relay unit for the indicators a single relay or are there two of them? The right indicators are fine but the left is very fast, not quite legal fast in fact. Do both indicators come from the same relay unit or are there two separate ones?

Post by **Bazzalucas** » Thu Nov 20, 2008 8:22 pm

I have a single relay, but a separate "black box" to split the rear indicators from the brake lights.

Post by **PSL184** » Thu Nov 20, 2008 8:36 pm

Single flasher unit only - Check the bulbs for correct voltage / wattage and for bad connections. These will effect the flash rate as the flasher unit works on load.

Post by **Luxobarge** » Fri Nov 21, 2008 10:35 am

PSL184 wrote:Single flasher unit only - Check the bulbs for correct voltage / wattage and for bad connections. These will effect the flash rate as the flasher unit works on load.

^^^WHS^^^

Seconded.

Post by **luridhue** » Fri Nov 21, 2008 1:52 pm

I will have an investigation! Thanks

(considering I studied Electronics it should probably have twigged but that was a few years ago now!)