Glove box surround screws.
Posted: Sun Nov 11, 2007 5:18 pm
Does anyone know the correct type of machine screw to hold on the drivers side glove box surround?
Morris Minor Owners Club
Promoting the Preservation and Use of the Postwar Morris Minor
https://board.mmoc.org.uk/
Glove box surround screws.
Page 1 of 1
Posted: Sun Nov 11, 2007 6:17 pm
On mine they're definitely BA thread with round head and cross head (Philips) slots, but I can't remember whether the size is 2 or 4. I think that the diameter is around 3/16 incj or 5 mm. Hope that helps.
Posted: Mon Nov 12, 2007 7:59 am
Hello Simmitc,
2 B.A. is 3\16" approximately, 4 B.A. is about 1\8" diameter. 2 B.A. is a common fixing screw on Classics, although some use the small U.N.F. screws with odd fraction sizes, which I don't quite remember (Things like 10\64")
Alec
2 B.A. is 3\16" approximately, 4 B.A. is about 1\8" diameter. 2 B.A. is a common fixing screw on Classics, although some use the small U.N.F. screws with odd fraction sizes, which I don't quite remember (Things like 10\64")
Alec
Posted: Mon Nov 12, 2007 8:35 pm
Thanks, guys.
Steve
Steve