Glove box surround screws.

Discuss Bodywork problems here.
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
Post Reply
FlyingScot
Minor Friendly
Posts: 65
Joined: Sun Mar 12, 2006 7:58 pm
Location: Cumbria
MMOC Member: No

Glove box surround screws.

Post by FlyingScot »

Does anyone know the correct type of machine screw to hold on the drivers side glove box surround?
:o
Top
simmitc
Moderator
Moderator
Posts: 4917
Joined: Thu Apr 15, 2004 9:43 am
Location: Essex
MMOC Member: Yes

Post by simmitc »

On mine they're definitely BA thread with round head and cross head (Philips) slots, but I can't remember whether the size is 2 or 4. I think that the diameter is around 3/16 incj or 5 mm. Hope that helps.
Top
Alec
Minor Legend
Posts: 2148
Joined: Thu Apr 15, 2004 7:29 am
Location: Oswestry, Shropshire
MMOC Member: No

Post by Alec »

Hello Simmitc,

2 B.A. is 3\16" approximately, 4 B.A. is about 1\8" diameter. 2 B.A. is a common fixing screw on Classics, although some use the small U.N.F. screws with odd fraction sizes, which I don't quite remember (Things like 10\64")

Alec
Top
FlyingScot
Minor Friendly
Posts: 65
Joined: Sun Mar 12, 2006 7:58 pm
Location: Cumbria
MMOC Member: No

Post by FlyingScot »

Thanks, guys.
Steve :)
Top
Post Reply

Return to “Bodywork”