Page 1 of 1
Seatbelts, how to fit them etc
Posted: Wed Nov 07, 2007 8:16 pm
by youngun
Having today witnessed what can happen in a car with no seat belts, i have decided to if possible fit them the my Mog! First off though, errrr i havent replaced the inner sill steps and dont intend to. Is there anyway i can fit seat belts without having to cut out the old inner sill steps and welding in the new reinforced ones designed for seat belts?
Thanks,
YG
Posted: Wed Nov 07, 2007 9:10 pm
by simmitc
Which model and what year is the car? It's usually possible to fit belts to Minors, but the exact instructions will vary.
Posted: Wed Nov 07, 2007 10:45 pm
by youngun
Simmitc, i have a 1957 saloon 4 door.
Posted: Thu Nov 08, 2007 7:04 am
by RogerRust
If uou do a search for "Sophies Progress" and read though the thread you will see how I did mine. At the bottom I used a L bracket and bolted through the floor with a nice big plate underneath.
Roger
Posted: Thu Nov 08, 2007 7:29 pm
by youngun
Roger, ive had a search through and could find a topic called "sophies progress-Sneak preview". But didnt seen anything very seat belt related, or did a do proper man look and see everything except what i wanted to see?!!!
thanks,
YG
Posted: Thu Nov 08, 2007 8:01 pm
by RogerRust
Sorry YG my mistake please see
SEATBELT LINK
Posted: Thu Nov 08, 2007 9:30 pm
by youngun
aha, a cunning solution for the top mount!
regards the bottom mount, is there any need to strengthen the inner sill step?