Morris Minor Owners Club

what size socket do i need for the steering wheel nut.

i have some VERY large ones but not are big enough or fit.

trouble is you can't take the whole rack in the shop to try them

It's an 1 5/16" AF

thankyou

It`s 3/4 Whit

If you are struggling to find one just ask at your local mini spares place.

Use a flat screwdriver and a hammer.

Loosens and tightens.

Take care when you pull the wheel off - it tends to let go suddenly and whack you in the face! Best to leave the nut slack but still on the threads while you jiggle the wheel free on the splines.

bmcecosse wrote:Take care when you pull the wheel off - it tends to let go suddenly and whack you in the face!

It could be worse. I had to remove a wheel and column together from a car, and after much wrenching to get it off the splins on the rack it shot backwards... At just below waist height.

Packedup wrote:At just below waist height. Ooh, it's all gone purple.

Never has a quote at the bottom been more apt

John

I had to remove a wheel and column together from a car, and after much wrenching to get it off the splins on the rack it shot backwards... At just below waist height.

Was it 'driving you nuts' ?


(boom tisch..)

Never has a quote at the bottom been more apt

Hope that doesnt apply to his ID as well

i once pulled the steering wheel off and the drivers seats was not bolted down either, got hit in the face with the wheel and cracked my head on the rear window... took me a few seconds to work out where I was!!

Picky