Page 1 of 1
marina disc brake fitting
Posted: Wed May 02, 2007 7:48 pm
by aupickup
on the marina disc set up, do the calipers go to the front or rear od the disc
also when i took the marina set up apart there was a spacer do i dtill need to use this
Posted: Wed May 02, 2007 8:55 pm
by bigginger
Towards the rear on mine.
Posted: Wed May 02, 2007 9:27 pm
by bmcecosse
Need for spacer will be obvious when you try to line the caliper up with the disc!
Posted: Wed May 02, 2007 11:20 pm
by GAS
If you are talking about the spacer between the two wheel bearings from the marina king pin then no.
The bearing float is set by the castle nut .
Posted: Thu May 03, 2007 6:06 pm
by aupickup
no it is the large spacer