marina disc brake fitting

Post by **aupickup** » Wed May 02, 2007 7:48 pm

on the marina disc set up, do the calipers go to the front or rear od the disc

also when i took the marina set up apart there was a spacer do i dtill need to use this

Post by **bigginger** » Wed May 02, 2007 8:55 pm

Towards the rear on mine.

Post by **bmcecosse** » Wed May 02, 2007 9:27 pm

Need for spacer will be obvious when you try to line the caliper up with the disc!

Post by **GAS** » Wed May 02, 2007 11:20 pm

If you are talking about the spacer between the two wheel bearings from the marina king pin then no.
The bearing float is set by the castle nut .

Post by **aupickup** » Thu May 03, 2007 6:06 pm

no it is the large spacer