Page 1 of 1
Chassis number stamped on floorpan.
Posted: Mon Nov 06, 2006 11:36 am
by paulhumphries
During the change of a master cylinder I noticed that the original drivers floorpan has a small area of the bitumen scraped away and the chassis number stamped.
Is this normal or has a previous owner done such ?
Paul Humphries.
Posted: Mon Nov 06, 2006 4:42 pm
by Kevin
Must confess to have not noticing one there, the main one being on the drivers side bulkhead thats often covered in paint.
Posted: Mon Nov 06, 2006 5:08 pm
by bigginger
I have a very vague memory of reading that there was one there when they left the factory, which would mean that you still have an original floor.
Posted: Mon Nov 06, 2006 5:37 pm
by tickman
i have on on mine not far fron the MC access panel and is as clear as they come. nice to know it is normal as i do not think mine has been welded. also the number is very straight so seems to be orignal!
Posted: Tue Nov 07, 2006 9:26 am
by stevey
yep original was there in the factory. just most people dont have the original floor there.