Page 5 of 5
Re: 1971 Met Panda "Rosie"
Posted: Mon May 20, 2013 7:29 am
by TvdWerf
My experience is ask a women to help, me and my wife did this together for another Morris.
Before removing the old wire from the car, connect a small rope on it, to put it in his place again when ready.
Note:
Sometimes the place for the wire is too small to get it in the new headlining.
And, organize about 10 meter small stainless steel wire, because the original is sometimes to bad to use again.
Re: 1971 Met Panda "Rosie"
Posted: Tue May 21, 2013 7:37 pm
by Fingolfin
For what it's worth, I'd suggest using new wire every time one fits a headlining -- when I put a new headlining in Mog I used the old wires, and upon retensioning two of the wires snapped.

Luckily they snapped near enough to the screws that I could relocate them to a nearby hole, but could never tension the headlining all the way! With new wire, I could have avoided this.
Re: 1971 Met Panda "Rosie"
Posted: Thu May 30, 2013 9:05 pm
by pskipper
Headlining in, not too happy with it but will see if the wrinkles can be smoothed out. Rear window now in after an hours work with 3 of us doing it. Interior in, quite a big job as you can't buy the correct door cards and panels for the police cars so we had to hand carve them from blocks of marble. Brand new brake line failed when trying to bleed out the last bit of spongyness. Very impressed with a certain east sussex based supplier who are sending a replacement even though I bought the set well over a year ago!
Photo's to follow when I have time.
Re: 1971 Met Panda "Rosie"
Posted: Mon Jun 03, 2013 8:13 pm
by pskipper
Here's the photo's, she's all back together now
[frame]

[/frame][frame]


[/frame][frame]


[/frame]
[frame]

[/frame]
And ready for the MOT which is tomorrow, gulp.
Final picture....
[frame]

[/frame]
Replica roof box manufacture is underway, we get the magnetic police signs and vinyls for the roof box delivered at the weekend

Re: 1971 Met Panda "Rosie"
Posted: Mon Jun 03, 2013 8:39 pm
by minor65
It really does look the part, well done
Re: 1971 Met Panda "Rosie"
Posted: Tue Jun 04, 2013 2:16 pm
by pskipper
Failed the MOT on a wheel bearing, nothing else, no advisories

It would have been nicer if she had just passed outright but I can live with replacing the wheel bearing

Re: 1971 Met Panda "Rosie" - Now with MOT and TAX :)
Posted: Thu Jun 06, 2013 1:54 pm
by pskipper
It's been a long haul, but she's now taxed and tested and will definitely be attending the National

Re: 1971 Met Panda "Rosie" - Now with MOT and TAX :)
Posted: Thu Jun 06, 2013 4:18 pm
by DaisyMayFozz
Congrats!

Re: 1971 Met Panda "Rosie" - Now with MOT and TAX :)
Posted: Mon Jun 10, 2013 5:00 pm
by pskipper
A couple of post MOT pictures, in full regalia

[frame]

[/frame][frame]

[/frame]
Re: 1971 Met Panda "Rosie" - Now with MOT and TAX :)
Posted: Mon Jun 10, 2013 5:45 pm
by Daddybear1984
Fantastic! love it, now drive it plenty and enjoy it
