Hello,
Should there be a fixing and tube here to guide the starter handle from inside the bumper to the dog (below the plate protecting the bottom of radiator)
If so, does anyone have a photo, so I could fabricate one or seek one out….
Kind regards.
Missing part ?
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
alfie austin
- Minor Friendly
- Posts: 64
- Joined: Sat Jul 12, 2014 10:46 pm
- Location: East Manchester
- MMOC Member: Yes
- geoberni
- Minor Maniac
- Posts: 5196
- Joined: Fri Aug 04, 2017 11:19 am
- Location: North Leicestershire
- MMOC Member: Yes
Re: Missing part ?
What age is the car?
It may not have had one. It wasn't listed in the Minor 1000 Parts Lists.
They were discontinued quite early on, I believe at the end of SII.
See here: viewtopic.php?t=71175
There's actually one on ebay right now: https://www.ebay.co.uk/itm/336161373088
It may not have had one. It wasn't listed in the Minor 1000 Parts Lists.
They were discontinued quite early on, I believe at the end of SII.
See here: viewtopic.php?t=71175
There's actually one on ebay right now: https://www.ebay.co.uk/itm/336161373088
Basil the 1955 series II


- svenedin
- Minor Legend
- Posts: 4644
- Joined: Fri Aug 29, 2014 9:27 am
- Location: Surrey
- MMOC Member: Yes
Re: Missing part ?
Looks like a Minor 1000 front panel and so it wouldn't have had a tube to guide the starting handle.
I wish I had taken a picture of the back of my front panel when it was off the car. Yours doesn't look quite right to me. That inner piece should have some clips that hold the small wiring sub-loom that goes across the engine bay.
Stephen
I wish I had taken a picture of the back of my front panel when it was off the car. Yours doesn't look quite right to me. That inner piece should have some clips that hold the small wiring sub-loom that goes across the engine bay.
Stephen
1969 1098cc Convertible “Xavier” which I have owned since 1989.
Stephen
Stephen