Wheel base measurement?

Discuss anything Morris Minor related.
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
Post Reply
cswagon1
Minor Friendly
Posts: 56
Joined: Fri Aug 22, 2025 2:48 pm
Location: Hereford UK
MMOC Member: No

Wheel base measurement?

Post by cswagon1 »

I am in the process of buying a 1969 Morris van and wondered if somebody would be kind enough to
tell me what the measurement is between the tyres so that I can see if it will safely sit on a 4 post lift please.

Many thanks

Graham

Sorry, I obviously meant the track measurement, not wheel base.
ManyMinors
Minor Legend
Posts: 3114
Joined: Tue Nov 11, 2014 9:41 am
MMOC Member: No

Re: Wheel base measurement?

Post by ManyMinors »

About 1.28 metres I believe.
You won't have any problems on a ramp. Garages can perform MOT's on them perfectly well :wink:
philthehill
Minor Maniac
Posts: 12105
Joined: Thu Jul 19, 2012 12:05 pm
Location: Hampshire
MMOC Member: Yes

Re: Wheel base measurement?

Post by philthehill »

The wheel base as specified in the BMC workshop manual general data section is 86" or 218.44cm.

User avatar
geoberni
Minor Maniac
Posts: 5243
Joined: Fri Aug 04, 2017 11:19 am
Location: North Leicestershire
MMOC Member: Yes

Re: Wheel base measurement?

Post by geoberni »

Not sure what your concerns are, but here's the measurements....
Screenshot_20250825-193918_Drive.jpg
Screenshot_20250825-193918_Drive.jpg (114.36 KiB) Viewed 4898 times
Basil the 1955 series II

Image
cswagon1
Minor Friendly
Posts: 56
Joined: Fri Aug 22, 2025 2:48 pm
Location: Hereford UK
MMOC Member: No

Re: Wheel base measurement?

Post by cswagon1 »

Many thanks indeed to both of you.

Graham.
User avatar
Bill_qaz
Minor Legend
Posts: 2269
Joined: Fri Jan 14, 2022 7:31 pm
Location: Oxfordshire
MMOC Member: Yes

Re: Wheel base measurement?

Post by Bill_qaz »

Do you mean the track, width between wheels as you are asking about putting on a lift. The wheel base length between wheels is irrelevant as 4 post lifts are designed to accommodate a great variance in length.
My saloon fits on the lift but you have to be careful as the track (width) does not leave much room for error.
Regards Bill
philthehill
Minor Maniac
Posts: 12105
Joined: Thu Jul 19, 2012 12:05 pm
Location: Hampshire
MMOC Member: Yes

Re: Wheel base measurement?

Post by philthehill »

The track as specified in the BMC wksp manual is:-
Front.............50 5/8"

Rear..............50 5/16"

cswagon1
Minor Friendly
Posts: 56
Joined: Fri Aug 22, 2025 2:48 pm
Location: Hereford UK
MMOC Member: No

Re: Wheel base measurement?

Post by cswagon1 »

Bill_qaz wrote: Mon Aug 25, 2025 11:05 pm Do you mean the track, width between wheels as you are asking about putting on a lift. The wheel base length between wheels is irrelevant as 4 post lifts are designed to accommodate a great variance in length.
My saloon fits on the lift but you have to be careful as the track (width) does not leave much room for error.
Hello Bill
I did of course mean the track and quickly corrected my mistake in my first post thank you.
My Austin 7 only just fitted on the lift but I was fairly sure the van would be fine but just wanted confirmation,
which I have received from many of you.
This will be the second van I have owned, albeit the first one was back in 1976 during the very hot summer.
That one was on a J plate and at the time was only 5 years old.
Since then I have restored dozens of classic vehicles and over the last 20 odd years have concentrated all my efforts
on old Land Rovers which I still own an example of.
I am sure that when it is delivered this weekend and I get stuck into it I shall be on here continuously asking all
sorts of questions if I'm unable to find the answers in the search areas.
Many thanks again for all your help.

Graham.
Post Reply