I am in the process of buying a 1969 Morris van and wondered if somebody would be kind enough to
tell me what the measurement is between the tyres so that I can see if it will safely sit on a 4 post lift please.
Many thanks
Graham
Sorry, I obviously meant the track measurement, not wheel base.
Wheel base measurement?
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
ManyMinors
- Minor Legend
- Posts: 3114
- Joined: Tue Nov 11, 2014 9:41 am
- MMOC Member: No
Re: Wheel base measurement?
About 1.28 metres I believe.
You won't have any problems on a ramp. Garages can perform MOT's on them perfectly well
You won't have any problems on a ramp. Garages can perform MOT's on them perfectly well
-
philthehill
- Minor Maniac
- Posts: 12105
- Joined: Thu Jul 19, 2012 12:05 pm
- Location: Hampshire
- MMOC Member: Yes
Re: Wheel base measurement?
The wheel base as specified in the BMC workshop manual general data section is 86" or 218.44cm.
- geoberni
- Minor Maniac
- Posts: 5243
- Joined: Fri Aug 04, 2017 11:19 am
- Location: North Leicestershire
- MMOC Member: Yes
Re: Wheel base measurement?
Not sure what your concerns are, but here's the measurements....
Basil the 1955 series II


-
cswagon1
- Minor Friendly
- Posts: 56
- Joined: Fri Aug 22, 2025 2:48 pm
- Location: Hereford UK
- MMOC Member: No
Re: Wheel base measurement?
Many thanks indeed to both of you.
Graham.
Graham.
- Bill_qaz
- Minor Legend
- Posts: 2269
- Joined: Fri Jan 14, 2022 7:31 pm
- Location: Oxfordshire
- MMOC Member: Yes
Re: Wheel base measurement?
Do you mean the track, width between wheels as you are asking about putting on a lift. The wheel base length between wheels is irrelevant as 4 post lifts are designed to accommodate a great variance in length.
My saloon fits on the lift but you have to be careful as the track (width) does not leave much room for error.
My saloon fits on the lift but you have to be careful as the track (width) does not leave much room for error.
Regards Bill
-
philthehill
- Minor Maniac
- Posts: 12105
- Joined: Thu Jul 19, 2012 12:05 pm
- Location: Hampshire
- MMOC Member: Yes
Re: Wheel base measurement?
The track as specified in the BMC wksp manual is:-
Front.............50 5/8"
Rear..............50 5/16"
Front.............50 5/8"
Rear..............50 5/16"
-
cswagon1
- Minor Friendly
- Posts: 56
- Joined: Fri Aug 22, 2025 2:48 pm
- Location: Hereford UK
- MMOC Member: No
Re: Wheel base measurement?
Hello BillBill_qaz wrote: ↑Mon Aug 25, 2025 11:05 pm Do you mean the track, width between wheels as you are asking about putting on a lift. The wheel base length between wheels is irrelevant as 4 post lifts are designed to accommodate a great variance in length.
My saloon fits on the lift but you have to be careful as the track (width) does not leave much room for error.
I did of course mean the track and quickly corrected my mistake in my first post thank you.
My Austin 7 only just fitted on the lift but I was fairly sure the van would be fine but just wanted confirmation,
which I have received from many of you.
This will be the second van I have owned, albeit the first one was back in 1976 during the very hot summer.
That one was on a J plate and at the time was only 5 years old.
Since then I have restored dozens of classic vehicles and over the last 20 odd years have concentrated all my efforts
on old Land Rovers which I still own an example of.
I am sure that when it is delivered this weekend and I get stuck into it I shall be on here continuously asking all
sorts of questions if I'm unable to find the answers in the search areas.
Many thanks again for all your help.
Graham.