Slave cylinder boot

[Classiccars]

Hi gang are you able to advise where to buy or a part number for this boot.At the front it is 3cm across and the part that pushes on the piston is 4cm wide.Bought two recently one too small one too big.

20250624_160332.jpg (689.76 KiB) Viewed 125 times

[les]

You’d expect to stretch the boot somewhat to fit, have you tried that ?

[oliver90owner]

It’s part number is written on it! Lockheed 33427

Try your local brake and clutch repairer?

[svenedin]

Try Powertrack Ltd. They are the largest UK stockist of British classic car brake parts.

https://www.powertrackbrakes.co.uk


Stephen

[les]

The part number on the boot illustrated is not, I think, the one he wants !

[Sleeper]

edited...

[Sleeper]

Full kit..

https://www.ebay.co.uk/itm/306358446103 ... R5yKleb0ZQ

John ;-)

EDIT Master or slave ?

[oliver90owner]

The part number on the boot illustrated is not, I think, the one he wants !

I think it is. He likely has the Lockheed 38253, which seems a common one - but presumably 38mm - and he wants a 33mm size?

Maybe if he posted where that slave cylinder came from, it might be easier - as there weren’t many hydraulically operated clutches fitted to moggie minors

[Classiccars]

Thank you I have left a message on the website mentioned and yes it is a hydrolic clutch that was fitted previously.I would imagine it is the 38mm I am after as at its widest it is around 40mm.colud be 38mm.