Further down the road; 1275 and ribcase questions
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
- Minor Friendly
- Posts: 44
- Joined: Fri Mar 21, 2025 7:53 pm
- Location: Us
- MMOC Member: No
Further down the road; 1275 and ribcase questions
Just mulling over future ideas while I wait for my donor car to arrive; if I can manage to find a 1275 and ribcase, will I need to adapt the hydraulic clutch if my Moggy is Left Hand Drive? Can't find definitive info on this. On a side note, I might change the car's name from Nigel to Steve Austin.... not necessarily because of the cost, just the depth of repairs to the bulkhead I face. DPO did not do me any favors.
-
- Minor Addict
- Posts: 649
- Joined: Thu Jun 19, 2008 7:40 pm
- Location: Pennsylvania, USA
- MMOC Member: No
Re: Further down the road; 1275 and ribcase questions
All you need is a 1098 LHD front plate for the gear box and a 1098 Minor clutch arm and you can then use the Minor mechanical linkage. However, the 1098 front plate is less common. In a pinch the smooth case front plate and arm can be used but is not the best choice.
-
- Minor Friendly
- Posts: 44
- Joined: Fri Mar 21, 2025 7:53 pm
- Location: Us
- MMOC Member: No
Re: Further down the road; 1275 and ribcase questions
Thanks for that!
- svenedin
- Minor Legend
- Posts: 3106
- Joined: Fri Aug 29, 2014 9:27 am
- Location: Surrey
- MMOC Member: Yes
Re: Further down the road; 1275 and ribcase questions
You can buy a LHD gearbox front plate from ESM that has already been modified with the lip oil seal as an improvement on the scroll.
https://www.morrisminorspares.com/gearb ... ew-p830915
https://www.morrisminorspares.com/gearb ... ew-p830915
1969 1098cc Convertible “Xavier” which I have owned since 1989.
Stephen
Stephen