Further down the road; 1275 and ribcase questions

Discuss mechanical problems here.
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
Post Reply
Paladin1962
Minor Friendly
Posts: 44
Joined: Fri Mar 21, 2025 7:53 pm
Location: Us
MMOC Member: No

Further down the road; 1275 and ribcase questions

Post by Paladin1962 »

Just mulling over future ideas while I wait for my donor car to arrive; if I can manage to find a 1275 and ribcase, will I need to adapt the hydraulic clutch if my Moggy is Left Hand Drive? Can't find definitive info on this. On a side note, I might change the car's name from Nigel to Steve Austin.... not necessarily because of the cost, just the depth of repairs to the bulkhead I face. DPO did not do me any favors.
jaekl
Minor Addict
Posts: 649
Joined: Thu Jun 19, 2008 7:40 pm
Location: Pennsylvania, USA
MMOC Member: No

Re: Further down the road; 1275 and ribcase questions

Post by jaekl »

All you need is a 1098 LHD front plate for the gear box and a 1098 Minor clutch arm and you can then use the Minor mechanical linkage. However, the 1098 front plate is less common. In a pinch the smooth case front plate and arm can be used but is not the best choice.
Paladin1962
Minor Friendly
Posts: 44
Joined: Fri Mar 21, 2025 7:53 pm
Location: Us
MMOC Member: No

Re: Further down the road; 1275 and ribcase questions

Post by Paladin1962 »

Thanks for that!
User avatar
svenedin
Minor Legend
Posts: 3106
Joined: Fri Aug 29, 2014 9:27 am
Location: Surrey
MMOC Member: Yes

Re: Further down the road; 1275 and ribcase questions

Post by svenedin »

You can buy a LHD gearbox front plate from ESM that has already been modified with the lip oil seal as an improvement on the scroll.

https://www.morrisminorspares.com/gearb ... ew-p830915
1969 1098cc Convertible “Xavier” which I have owned since 1989.

Stephen
Post Reply