Front seat belts in a 1959 Traveller with working trafficators

Discuss anything Morris Minor related.
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
Post Reply
KeithL
Minor Fan
Posts: 487
Joined: Mon May 24, 2010 9:06 pm
Location: Worcestershire
MMOC Member: Yes

Front seat belts in a 1959 Traveller with working trafficators

Post by KeithL »

Has anyone fitted front seat belts to a Traveller (ours is a 1959) which also has working trafficators as I assume the mounting points would be at about the same height and would interfere with the trafficators? Is it even possible to fit them? Is the 'B' pillar in earlier cars strong enough to support seat belt mountings and if so how would you go about it?

User avatar
geoberni
Minor Legend
Posts: 4402
Joined: Fri Aug 04, 2017 11:19 am
Location: North Leicestershire
MMOC Member: Yes

Re: Front seat belts in a 1959 Traveller with working trafficators

Post by geoberni »

If you have a workshop manual, the Morris/BL one, AKD530 (not any other as far as I know), then the seat belt fitment details are in there...
It may only cover car which had the anchorages factory fitted, but it'll give you the layout details.
Basil the 1955 series II

Image
KeithL
Minor Fan
Posts: 487
Joined: Mon May 24, 2010 9:06 pm
Location: Worcestershire
MMOC Member: Yes

Re: Front seat belts in a 1959 Traveller with working trafficators

Post by KeithL »

Thank you @geoberni. I've looked in my Workshop Manual (which is a Morris one and doesn't mention BL) but could find no mention of seat belts. I also tried the parts manual, but couldn't find anything in there either.

In the end I rang the mechanic and he wasn't sure if seat belts could be fitted to our car either but he will have a look and we will go from there. I'll let everyone know what happens.

User avatar
geoberni
Minor Legend
Posts: 4402
Joined: Fri Aug 04, 2017 11:19 am
Location: North Leicestershire
MMOC Member: Yes

Re: Front seat belts in a 1959 Traveller with working trafficators

Post by geoberni »

In which case I'm assuming your workshop manual is a really early edition before seat belts were required....
Or you just haven't looked in Section R, The Body.
The Index for Section R is identified as Issue 5, so earlier than the final edition...
Section R.JPG
Section R.JPG (120.7 KiB) Viewed 3770 times
Basil the 1955 series II

Image
KeithL
Minor Fan
Posts: 487
Joined: Mon May 24, 2010 9:06 pm
Location: Worcestershire
MMOC Member: Yes

Re: Front seat belts in a 1959 Traveller with working trafficators

Post by KeithL »

My copy is Issue 2 and only goes up to R.32 - Locating a new front end assembly.

User avatar
geoberni
Minor Legend
Posts: 4402
Joined: Fri Aug 04, 2017 11:19 am
Location: North Leicestershire
MMOC Member: Yes

Re: Front seat belts in a 1959 Traveller with working trafficators

Post by geoberni »

KeithL wrote: Sat Jul 27, 2024 10:00 pm My copy is Issue 2 and only goes up to R.32 - Locating a new front end assembly.
Ahhh... Some years back there were some issues about providing links to downloads, but I think I can manage to suggest that a visit to the Library of the Oklahoma British Car Breakfast Club would help you.... It has several download of classic documents a few of which are relevant to Minors and their equipment :tu1: .
https://britishcarbreakfastclub.com/
Basil the 1955 series II

Image
KeithL
Minor Fan
Posts: 487
Joined: Mon May 24, 2010 9:06 pm
Location: Worcestershire
MMOC Member: Yes

Re: Front seat belts in a 1959 Traveller with working trafficators

Post by KeithL »

Thank you. That gives instructions for both later vehicles that have the anchorage points fitted and earlier vehicles that don't. I'm not sure what my body number is but I suspect body number 90769 is when they switched away from trafficators so I fall into the 'earlier' camp.

That's been really help - thank you.

Post Reply