Engine identification plate

Discuss anything Morris Minor related.
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
Post Reply
Alex Macmillan
Minor Friendly
Posts: 28
Joined: Tue Sep 14, 2021 1:10 pm
Location: Moray, Scottish Highlands
MMOC Member: Yes

Engine identification plate

Post by Alex Macmillan »

My Traveller had a Marina 1275 engine fitted when I bought it 6 months ago. I have noticed that the engine identification plate is missing, although I do know the number from paperwork. Is there a way that a new plate can be obtained, stamped with the correct number for installation?
philthehill
Minor Maniac
Posts: 11574
Joined: Thu Jul 19, 2012 12:05 pm
Location: Hampshire
MMOC Member: Yes

Re: Engine identification plate

Post by philthehill »

Yes, and here is a link to obtain a new engine number plate and having it stamped with the correct engine number.
https://www.ebay.co.uk/itm/392884038867 ... R_C-sI7xYA

Here are the two rivets required to hold the plate in place.
https://www.ebay.co.uk/itm/185429313930 ... R4jLyI7xYA

You may have to drill two new holes as the original rivets are very hard and near impossible to drill out,

Alex Macmillan
Minor Friendly
Posts: 28
Joined: Tue Sep 14, 2021 1:10 pm
Location: Moray, Scottish Highlands
MMOC Member: Yes

Re: Engine identification plate

Post by Alex Macmillan »

Excellent response. Thank you.
kevin s
Minor Legend
Posts: 1388
Joined: Tue Mar 26, 2013 8:20 pm
Location: Chelmsford, essex
MMOC Member: No

Re: Engine identification plate

Post by kevin s »

blimey £42 for a small strip of alloy with a few numbers stamped in it, you can get letter stamp kits for a tenner on ebay!
philthehill
Minor Maniac
Posts: 11574
Joined: Thu Jul 19, 2012 12:05 pm
Location: Hampshire
MMOC Member: Yes

Re: Engine identification plate

Post by philthehill »

For a tenner you can purchase punches that give an indented number/letter in the plate but the numbers/letters on a BMC engine number plate are raised and the reverse punches that enable the numbers/letters to be raised when stamped from underside of the plate cost money.
You can get front stamped engine number plates for less https://www.ebay.co.uk/itm/113947803759 ... R4L_wpjxYA but that is not how the engine number plate was produced by the BMC factory.

ManyMinors
Minor Legend
Posts: 2960
Joined: Tue Nov 11, 2014 9:41 am
MMOC Member: No

Re: Engine identification plate

Post by ManyMinors »

£42.00 is a mad price. I don't know why anybody would assume that ebay is the best source of anything......It generally seems full of very expensive "middle men" and chancers to me and there are usually much cheaper solutions if you spend a little while looking. I doubt the ebay seller even makes these plates himself. He probably orders them from Tim Harber at Minimail in Gloucestershire who'll sell them to you for about £20.00. Just google Minimail and look at his website :wink: He's well established and highly thought of in Mini circles.
panky
Minor Legend
Posts: 2042
Joined: Wed Aug 20, 2014 4:12 pm
Location: Cheshire
MMOC Member: No

Re: Engine identification plate

Post by panky »

Thanks for that link, I need an engine plate for my '91 Cooper :tu1:
Image
Alex Macmillan
Minor Friendly
Posts: 28
Joined: Tue Sep 14, 2021 1:10 pm
Location: Moray, Scottish Highlands
MMOC Member: Yes

Re: Engine identification plate

Post by Alex Macmillan »

Great advice and information from this knowledgeable forum.
Post Reply