Engine identification plate
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
- Minor Friendly
- Posts: 28
- Joined: Tue Sep 14, 2021 1:10 pm
- Location: Moray, Scottish Highlands
- MMOC Member: Yes
Engine identification plate
My Traveller had a Marina 1275 engine fitted when I bought it 6 months ago. I have noticed that the engine identification plate is missing, although I do know the number from paperwork. Is there a way that a new plate can be obtained, stamped with the correct number for installation?
-
- Minor Maniac
- Posts: 11574
- Joined: Thu Jul 19, 2012 12:05 pm
- Location: Hampshire
- MMOC Member: Yes
Re: Engine identification plate
Yes, and here is a link to obtain a new engine number plate and having it stamped with the correct engine number.
https://www.ebay.co.uk/itm/392884038867 ... R_C-sI7xYA
Here are the two rivets required to hold the plate in place.
https://www.ebay.co.uk/itm/185429313930 ... R4jLyI7xYA
You may have to drill two new holes as the original rivets are very hard and near impossible to drill out,
https://www.ebay.co.uk/itm/392884038867 ... R_C-sI7xYA
Here are the two rivets required to hold the plate in place.
https://www.ebay.co.uk/itm/185429313930 ... R4jLyI7xYA
You may have to drill two new holes as the original rivets are very hard and near impossible to drill out,
-
- Minor Friendly
- Posts: 28
- Joined: Tue Sep 14, 2021 1:10 pm
- Location: Moray, Scottish Highlands
- MMOC Member: Yes
Re: Engine identification plate
Excellent response. Thank you.
-
- Minor Legend
- Posts: 1388
- Joined: Tue Mar 26, 2013 8:20 pm
- Location: Chelmsford, essex
- MMOC Member: No
Re: Engine identification plate
blimey £42 for a small strip of alloy with a few numbers stamped in it, you can get letter stamp kits for a tenner on ebay!
-
- Minor Maniac
- Posts: 11574
- Joined: Thu Jul 19, 2012 12:05 pm
- Location: Hampshire
- MMOC Member: Yes
Re: Engine identification plate
For a tenner you can purchase punches that give an indented number/letter in the plate but the numbers/letters on a BMC engine number plate are raised and the reverse punches that enable the numbers/letters to be raised when stamped from underside of the plate cost money.
You can get front stamped engine number plates for less https://www.ebay.co.uk/itm/113947803759 ... R4L_wpjxYA but that is not how the engine number plate was produced by the BMC factory.
You can get front stamped engine number plates for less https://www.ebay.co.uk/itm/113947803759 ... R4L_wpjxYA but that is not how the engine number plate was produced by the BMC factory.
-
- Minor Legend
- Posts: 2960
- Joined: Tue Nov 11, 2014 9:41 am
- MMOC Member: No
Re: Engine identification plate
£42.00 is a mad price. I don't know why anybody would assume that ebay is the best source of anything......It generally seems full of very expensive "middle men" and chancers to me and there are usually much cheaper solutions if you spend a little while looking. I doubt the ebay seller even makes these plates himself. He probably orders them from Tim Harber at Minimail in Gloucestershire who'll sell them to you for about £20.00. Just google Minimail and look at his website
He's well established and highly thought of in Mini circles.

-
- Minor Friendly
- Posts: 28
- Joined: Tue Sep 14, 2021 1:10 pm
- Location: Moray, Scottish Highlands
- MMOC Member: Yes
Re: Engine identification plate
Great advice and information from this knowledgeable forum.