So...
Does anyone have any idea which jet might be at least roughly appropriate for a 1275 ital running with a standard 1098's carb?
And how much damage am I likely to be doing, I'm presuming she's going to be running very, very lean...
At the moment Rebecca's running with the choke permanently a bit out, but is desparately breathless. Why haven't I changed to the bigger carb, given that I've got one? See my diary if you want to know, but it's a bit long... http://pyoor.org/wordpress
Which jet, and where from (and it doesn't *mutter* fit)
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
Pyoor_Kate
- Minor Addict
- Posts: 986
- Joined: Fri May 28, 2004 10:22 pm
- Location: Washington State, US.
- MMOC Member: No
Which jet, and where from (and it doesn't *mutter* fit)
Pyoor Kate
The Electric Minor Project
The Current Fleet:
1969 Morris 'thou, 4 Door. 2010 Mitsubishi iMiEV. 1920s BSA Pushbike. 1930s Raleigh pushbike.
The Ex-Fleet:
1974 & 1975 Daf 44s, 1975 Enfield 8000 EV, 1989 Yugo 45, 1981 Golf Mk1, 1971 Vauxhall Viva, 1989 MZ ETZ 125, 1989 Volvo Vario 340, 1990, 1996 & 1997 MZ/Kanuni ETZ 251s
Desires:
Trabant 601, Tatra T603, Series II Landy, Moskvitch-401, Vincent HRD Black Shadow, Huge garage, Job in Washington State.
The Electric Minor Project
The Current Fleet:
1969 Morris 'thou, 4 Door. 2010 Mitsubishi iMiEV. 1920s BSA Pushbike. 1930s Raleigh pushbike.
The Ex-Fleet:
1974 & 1975 Daf 44s, 1975 Enfield 8000 EV, 1989 Yugo 45, 1981 Golf Mk1, 1971 Vauxhall Viva, 1989 MZ ETZ 125, 1989 Volvo Vario 340, 1990, 1996 & 1997 MZ/Kanuni ETZ 251s
Desires:
Trabant 601, Tatra T603, Series II Landy, Moskvitch-401, Vincent HRD Black Shadow, Huge garage, Job in Washington State.
RE: Which jet, and where from (and it doesn
Ahem - sorry about that! Anyone want a log manifold that doesn't fit? Free to a good (or bad, or indifferent home)...
-
Alec
- Minor Legend
- Posts: 2148
- Joined: Thu Apr 15, 2004 7:29 am
- Location: Oswestry, Shropshire
- MMOC Member: No
RE: Which jet, and where from (and it doesn
Hello Kate,
the jet is always the same, it is the needle that you probably need to change. I can't recommend one myself but give this programme a go, it allows you to enter the engine specification and then it suggests a suitable needle. : www.winsu.co.uk
For replacement needles then www.burlen.co.uk By the way their manual on S.U.'s is invaluable, if slightly pricey.
Alec
the jet is always the same, it is the needle that you probably need to change. I can't recommend one myself but give this programme a go, it allows you to enter the engine specification and then it suggests a suitable needle. : www.winsu.co.uk
For replacement needles then www.burlen.co.uk By the way their manual on S.U.'s is invaluable, if slightly pricey.
Alec
-
Pyoor_Kate
- Minor Addict
- Posts: 986
- Joined: Fri May 28, 2004 10:22 pm
- Location: Washington State, US.
- MMOC Member: No
RE: Which jet, and where from (and it doesn
Ta...
Oooh, okay, suggests an ABY needle.
I wonder if millards do them...
Oooh, okay, suggests an ABY needle.
I wonder if millards do them...
Pyoor Kate
The Electric Minor Project
The Current Fleet:
1969 Morris 'thou, 4 Door. 2010 Mitsubishi iMiEV. 1920s BSA Pushbike. 1930s Raleigh pushbike.
The Ex-Fleet:
1974 & 1975 Daf 44s, 1975 Enfield 8000 EV, 1989 Yugo 45, 1981 Golf Mk1, 1971 Vauxhall Viva, 1989 MZ ETZ 125, 1989 Volvo Vario 340, 1990, 1996 & 1997 MZ/Kanuni ETZ 251s
Desires:
Trabant 601, Tatra T603, Series II Landy, Moskvitch-401, Vincent HRD Black Shadow, Huge garage, Job in Washington State.
The Electric Minor Project
The Current Fleet:
1969 Morris 'thou, 4 Door. 2010 Mitsubishi iMiEV. 1920s BSA Pushbike. 1930s Raleigh pushbike.
The Ex-Fleet:
1974 & 1975 Daf 44s, 1975 Enfield 8000 EV, 1989 Yugo 45, 1981 Golf Mk1, 1971 Vauxhall Viva, 1989 MZ ETZ 125, 1989 Volvo Vario 340, 1990, 1996 & 1997 MZ/Kanuni ETZ 251s
Desires:
Trabant 601, Tatra T603, Series II Landy, Moskvitch-401, Vincent HRD Black Shadow, Huge garage, Job in Washington State.
-
TerryG
- Minor Fan
- Posts: 245
- Joined: Sat Aug 31, 2002 11:29 pm
- Location: Leyton (East London)
- MMOC Member: No
RE: Which jet, and where from (and it doesn
www.minispares.com do needles for SU Carbs
"The answer to the Ultimate Question... Of Life, the Universe and Everything..." said Deep Thought. "Is..." said Deep Thought, and paused. "Is... Forty-two," said Deep Thought.
RE: Which jet, and where from (and it doesn
The 1098 needle should not be too far away - the carb has no idea anything has changed, it just sees air going through, and so start off by adjusting the idle mix correctly and the see how it goes.
