Hi
I am about to clean out the cooling system on TTO 758H, and need to remove the engine drain tap, because when open, no water emerges! I suppose there is a blockage of sediment behind it. Access to the tap seems very restricted - does anyone have experience on how to remove that tap easily, please?
Cooling System
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
- geoberni
- Minor Legend
- Posts: 4405
- Joined: Fri Aug 04, 2017 11:19 am
- Location: North Leicestershire
- MMOC Member: Yes
Re: Cooling System
Hello John
I had the same blockage issue, but found no problem with a open ended spanner. Once 'cracked', mine turned easily by hand.
if you search the forum for variations of 'engine coolant drain tap' you'll find loads of old topics about it over the years.
I had the same blockage issue, but found no problem with a open ended spanner. Once 'cracked', mine turned easily by hand.
if you search the forum for variations of 'engine coolant drain tap' you'll find loads of old topics about it over the years.
Basil the 1955 series II


Re: Cooling System
I removed mine with an open ended spanner, can’t recall it being difficult to reach. Perhaps you need a shorter spanner if there is some obstruction on your vehicle.
Re: Cooling System
Many thanks!geoberni wrote: ↑Tue Oct 20, 2020 10:36 am Hello John
I had the same blockage issue, but found no problem with a open ended spanner. Once 'cracked', mine turned easily by hand.
if you search the forum for variations of 'engine coolant drain tap' you'll find loads of old topics about it over the years.
John