Clutch operating fork from.......??

[jagnut66]

Hi,
Amongst my stash of spares I have come across the below clutch operating fork, with what looks like an attachment to work in conjunction with a hydraulic clutch slave cylinder.
But am I right and does anyone have any idea what it may be off?
I think it was attached to a spare gearbox at one point but, if so, this was so long ago that I am now uncertain. If so my guess would be MG Midget but feel free to correct me on this.
(Yes, it's been 'tarted up', I have a habit of doing this with some spares periodically, I get an urge...... )
Best wishes,
Mike.

DSCF3579.JPG (1.36 MiB) Viewed 460 times

DSCF3580.JPG (1.33 MiB) Viewed 460 times

[mogbob]

Mike
Looks like a Sprite / Midget fork to me , see attached : -
https://www.moss-europe.co.uk/shop-by-m ... 58-66.html
Keep safe
Bob

[philthehill]

The release arm/fork shown in the picture above is a 1275cc MG Midget item.

http://www.gerardsgarage.com/Garage/Tec ... arings.htm

[jagnut66]

Thanks for the replies, it will go on my 'free spares' pile at the next national.
I've filled one box with giveaways already!........
(Amazing what you amass over the years.)
Best wishes,
Mike.