Hi,
Amongst my stash of spares I have come across the below clutch operating fork, with what looks like an attachment to work in conjunction with a hydraulic clutch slave cylinder.
But am I right and does anyone have any idea what it may be off?
I think it was attached to a spare gearbox at one point but, if so, this was so long ago that I am now uncertain. If so my guess would be MG Midget but feel free to correct me on this.
(Yes, it's been 'tarted up', I have a habit of doing this with some spares periodically, I get an urge...... )
Best wishes,
Mike.
DSCF3579.JPG (1.36 MiB) Viewed 597 times
DSCF3580.JPG (1.33 MiB) Viewed 597 times
1954 Series 2: 4 door: "Sally" -- Back together, more flatting and polishing to come, now the engine just refuses to run properly.......
1970 Triumph Herald 1200: "Hetty" -- Driven back from Llangollen in Wales (twice.....)
1952 Morris Minor MM highlight with sidevalve engine still fitted, wants work, so joins the queue for now......
Thanks for the replies, it will go on my 'free spares' pile at the next national.
I've filled one box with giveaways already!........
(Amazing what you amass over the years.)
Best wishes,
Mike.
1954 Series 2: 4 door: "Sally" -- Back together, more flatting and polishing to come, now the engine just refuses to run properly.......
1970 Triumph Herald 1200: "Hetty" -- Driven back from Llangollen in Wales (twice.....)
1952 Morris Minor MM highlight with sidevalve engine still fitted, wants work, so joins the queue for now......
)