Trying to find 948 thermostat housing with temp sender
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
Trying to find 948 thermostat housing with temp sender
Hi everyone
Does anyone know where I can get a thermostat housing for the 948 engine which has a tapped hole for a temperature sender ? Would prefer to try and find one than going down the bottom hose mod
Does anyone know where I can get a thermostat housing for the 948 engine which has a tapped hole for a temperature sender ? Would prefer to try and find one than going down the bottom hose mod
-
- Minor Maniac
- Posts: 11574
- Joined: Thu Jul 19, 2012 12:05 pm
- Location: Hampshire
- MMOC Member: Yes
Re: Trying to find 948 thermostat housing with temp sender
No longer available.
You may be able to find a NOS item or a good S/H item but very hard to find now.
There were two types of thermostat housing - one with the transmitter fitting in the top and one with the transmitter fitting in the side Pt No: 12A408. Both types work well.
Dependent upon what temp gauge transmitter you use you could use a modified Marina thermostat housing with modified brass filler plug.
Here is one modified by Sandun:-
Or you could cut the top hose and insert a alloy hose adapter into which the transmitter screws.
https://www.merlinmotorsport.co.uk/p/28 ... aptor-ha28
Another solution is to obtain a thermostat housing of the type in the link below and re-drill and tap the transmitter hole:-
http://www.minispares.com/product/Class ... o%20search
https://www.ebay.co.uk/itm/Thermostat-H ... SwUrZd0XOX
http://www.minispares.com/product/Class ... |Back%20to
Note:- not all thermostat housings advertised as 12G103 are the same.
You may be able to find a NOS item or a good S/H item but very hard to find now.
There were two types of thermostat housing - one with the transmitter fitting in the top and one with the transmitter fitting in the side Pt No: 12A408. Both types work well.
Dependent upon what temp gauge transmitter you use you could use a modified Marina thermostat housing with modified brass filler plug.
Here is one modified by Sandun:-
Or you could cut the top hose and insert a alloy hose adapter into which the transmitter screws.
https://www.merlinmotorsport.co.uk/p/28 ... aptor-ha28
Another solution is to obtain a thermostat housing of the type in the link below and re-drill and tap the transmitter hole:-
http://www.minispares.com/product/Class ... o%20search
https://www.ebay.co.uk/itm/Thermostat-H ... SwUrZd0XOX
http://www.minispares.com/product/Class ... |Back%20to
Note:- not all thermostat housings advertised as 12G103 are the same.
Re: Trying to find 948 thermostat housing with temp sender
is it one of these? i have 2 one going on e bay tenner plus3 pounds potage
- Attachments
-
- P1010389_2.jpg (1.94 MiB) Viewed 1431 times
-
- P1010388_2.jpg (2.29 MiB) Viewed 1431 times
-
- Minor Maniac
- Posts: 11574
- Joined: Thu Jul 19, 2012 12:05 pm
- Location: Hampshire
- MMOC Member: Yes
Re: Trying to find 948 thermostat housing with temp sender
I said i was a hoarder,selling a few bits to help finance my prodject.. 

-
- Minor Maniac
- Posts: 11574
- Joined: Thu Jul 19, 2012 12:05 pm
- Location: Hampshire
- MMOC Member: Yes
Re: Trying to find 948 thermostat housing with temp sender
You hoard as much as you like.
One of my favorite saying is -"it is all out there but finding it is the problem".
Phil

One of my favorite saying is -"it is all out there but finding it is the problem".
Phil
Re: Trying to find 948 thermostat housing with temp sender
I think the one you show Phil was on the Marina done my time in a Bmc/leyland after garage 1964 we repaired everything then..
-
- Minor Maniac
- Posts: 11574
- Joined: Thu Jul 19, 2012 12:05 pm
- Location: Hampshire
- MMOC Member: Yes
Re: Trying to find 948 thermostat housing with temp sender
Yes the thermostat housing is off a Marina.
I have used a Marina thermostat housing on my Minor for some time now.
I have used a Marina thermostat housing on my Minor for some time now.
Re: Trying to find 948 thermostat housing with temp sender
I have the lower piece as well,having a clear out,sold loads i've been taking pics of my run around i'm doing save my VWT5 i think he'd been hill climbing with it.it had after market shocks and antiroll bar on it had it 2 years but had a heart bypass in Jan,recovering now back jogging.
not sure what are you driving off your water pump looks great.
not sure what are you driving off your water pump looks great.
-
- Minor Maniac
- Posts: 11574
- Joined: Thu Jul 19, 2012 12:05 pm
- Location: Hampshire
- MMOC Member: Yes
Re: Trying to find 948 thermostat housing with temp sender
The lower part is fitted because the very late 940 head does not have the facility to fit a thermostat.
The water pump is driving the alternator via a toothed belt.
If you are wondering where the radiator is - it is under the boot.
The water pump is driving the alternator via a toothed belt.
If you are wondering where the radiator is - it is under the boot.
Re: Trying to find 948 thermostat housing with temp sender
i'll put it on now under morris 1000 thermostat housing..i'm glyna2006 ..cheers
Re: Trying to find 948 thermostat housing with temp sender
listed on ebay
Re: Trying to find 948 thermostat housing with temp sender
Thanks , just found it 