HS2 S.U needles in 1100 A motor single carb

Discuss mechanical problems here.
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
Post Reply
niftyrodman
Minor Fan
Posts: 123
Joined: Mon Aug 13, 2018 8:45 pm
MMOC Member: No

HS2 S.U needles in 1100 A motor single carb

Post by niftyrodman »

I have ruined one set of plugs with an overly rich needle, in a reco engine,and having changed that needle I am having difficulty to get the tune point of engine rev lift at the 1/32 lift of the piston. Im not sure what speed the engine should be to try that mixture test, I have I believe a NA needle in it right now, but Im not sure whether that is the total description. Its a minefield this jetting, and expensive experimenting. Probably the H2 is larger carb than original, but jetted right shouldnt make much difference?
philthehill
Minor Maniac
Posts: 11582
Joined: Thu Jul 19, 2012 12:05 pm
Location: Hampshire
MMOC Member: Yes

Re: HS2 S.U needles in 1100 A motor single carb

Post by philthehill »

The HS2 is the correct carb for the 1098cc Minor 1000. The tag attached to the float chamber should read AUD13.

The correct standard needle is AN.

The weak needle is EB.

The rich needle is H6.

The main jet is 0.090.

niftyrodman
Minor Fan
Posts: 123
Joined: Mon Aug 13, 2018 8:45 pm
MMOC Member: No

Re: HS2 S.U needles in 1100 A motor single carb

Post by niftyrodman »

I apologise, as I had the letters back to front. Have the right needle, and thanks.
Post Reply