Evaporative Control Systems

Discuss mechanical problems here.
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
Post Reply
User avatar
Monty-4
Minor Addict
Posts: 699
Joined: Sun Oct 26, 2014 7:17 pm
Location: Gloucestershire
MMOC Member: Yes

Evaporative Control Systems

Post by Monty-4 »

I'm vaguely aware later Minis and maybe USA export MGBs were fitted with control systems that piped the fuel tank vent and float chamber vents through a charcoal canister and back into the breathing system of the engine through reduced diameter hose (7/64ths?!). Since reverting from a HiF38 back to HS2 - which has a float bowl with just one take-off and a small hole to vent it straight into atmosphere behind a little plate - I've noticed the smell, and I doubt the atmosphere appreciates the unburnt hydrocarbons either!

This got me thinking that if I picked up one of the charcoal canisters and found a float bowl lid with two take-offs I could at the very least pipe it into that, even if I didn't bother returning it to a rocker cover vent. But I'm not sure if there would be any convenient way to vent the fuel tank (and swap to a non-vented filler cap).

Any thoughts? Clothes-peg on nose instead?
68' 4-door Saloon, another 'Monty'.
philthehill
Minor Maniac
Posts: 11583
Joined: Thu Jul 19, 2012 12:05 pm
Location: Hampshire
MMOC Member: Yes

Re: Evaporative Control Systems

Post by philthehill »

Use a clothes peg on the nose. :D

Post Reply