Juddering in reverse
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
Juddering in reverse
Ok so the car goes forward that's grand put it in reverse and I judders and I mean judders like the body's trying leap off the suspension. Thus far brakes ruled out nothings sticking.
-
- Minor Addict
- Posts: 630
- Joined: Mon Feb 03, 2014 5:16 pm
- Location: Gt Holland, Essex
- MMOC Member: Yes
Re: Juddering in reverse
The clutch spigot bearing in the end of the crankshaft is a good souce of clutch judder, mine was very noticeable in reverse and over last winters rebuild found it to be very worn. It got a new clutch as well while I was there, but the judder has gone.
Could also be the clutch or flywheel warped but go for the above first, whatever not a 5 minute fix.
Could also be the clutch or flywheel warped but go for the above first, whatever not a 5 minute fix.
Re: Juddering in reverse
Axle alignment, leaf spring bushes etc....
[sig]8426[/sig]
Compare the Minors - Simples !! http://mog.myfreeforum.org/index.php
Compare the Minors - Simples !! http://mog.myfreeforum.org/index.php
-
- Series MM Registrar
- Posts: 10183
- Joined: Sun Jul 24, 2005 11:39 pm
- Location: Reading
- MMOC Member: No
Re: Juddering in reverse
A good chance the gearbox stabiliser wire has broken, that would show those symptoms.
-
- Minor Legend
- Posts: 1904
- Joined: Sun Jul 03, 2011 11:37 am
- Location: Near Belper
- MMOC Member: Yes
Re: Juddering in reverse
Good job that we all do 99.99%of our miles going forwards.
Re: Juddering in reverse
Right gearbox cable is fine I honestly don't think it's drive train related it's the front suspension that seems to shake like hell it doesn't have an engine steady and never has .
Re: Juddering in reverse
or gearbox mounts,,,,
[sig]8426[/sig]
Compare the Minors - Simples !! http://mog.myfreeforum.org/index.php
Compare the Minors - Simples !! http://mog.myfreeforum.org/index.php
Re: Juddering in reverse
have an urgent look at the tie bar bushes and mountings



Re: Juddering in reverse
We may have a winner one of the two melted liquorice allsorts that pass for engine mounts has come away from its backing.
-
- Minor Legend
- Posts: 1565
- Joined: Fri Aug 05, 2011 9:53 pm
- Location: Leeds, West Yorkshire
- MMOC Member: No
Re: Juddering in reverse
Check the propshaft universal joints too, if the engine mounts are failing the juddering could have an impact on the uv joints.
Richard
Opinions are like people,everyone can be different.
Opinions are like people,everyone can be different.