Right then. The brake cables have been sorted out (thanks to all who advised on that one).
I now need to start work on fitting the exhaust pipe and I would like to know where under the floor the hangers and brackets should be fitted please.
As ever, always very grateful for all replies.
Thank you.
Exhaust pipe fitting
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
- Minor Friendly
- Posts: 73
- Joined: Sun Nov 23, 2014 6:31 pm
- Location: Ilford, Essex
- MMOC Member: No
-
- Series MM Registrar
- Posts: 10183
- Joined: Sun Jul 24, 2005 11:39 pm
- Location: Reading
- MMOC Member: No
Re: Exhaust pipe fitting
Rear hanger in front end of rear boot "box section". Front hanger where floor slopes upwards under the back seat.
Support the front pipe with a jack in front of the silencer and wind up and adjust fit on manifold pipe then fit clamp
Support the front pipe with a jack in front of the silencer and wind up and adjust fit on manifold pipe then fit clamp
[sig]3580[/sig]
-
- Minor Friendly
- Posts: 73
- Joined: Sun Nov 23, 2014 6:31 pm
- Location: Ilford, Essex
- MMOC Member: No
Re: Exhaust pipe fitting
Thank you very much. That was very helpful and I got the the exhaust system back together this afternoon.mike.perry wrote:Rear hanger in front end of rear boot "box section". Front hanger where floor slopes upwards under the back seat.
Support the front pipe with a jack in front of the silencer and wind up and adjust fit on manifold pipe then fit clamp
Next stop... electrics.