Exhaust pipe fitting

Discuss mechanical problems here.
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
Post Reply
Childnurse
Minor Friendly
Posts: 73
Joined: Sun Nov 23, 2014 6:31 pm
Location: Ilford, Essex
MMOC Member: No

Exhaust pipe fitting

Post by Childnurse »

Right then. The brake cables have been sorted out (thanks to all who advised on that one).

I now need to start work on fitting the exhaust pipe and I would like to know where under the floor the hangers and brackets should be fitted please.

As ever, always very grateful for all replies.

Thank you.
mike.perry
Series MM Registrar
Posts: 10183
Joined: Sun Jul 24, 2005 11:39 pm
Location: Reading
MMOC Member: No

Re: Exhaust pipe fitting

Post by mike.perry »

Rear hanger in front end of rear boot "box section". Front hanger where floor slopes upwards under the back seat.
Support the front pipe with a jack in front of the silencer and wind up and adjust fit on manifold pipe then fit clamp
[sig]3580[/sig]
Childnurse
Minor Friendly
Posts: 73
Joined: Sun Nov 23, 2014 6:31 pm
Location: Ilford, Essex
MMOC Member: No

Re: Exhaust pipe fitting

Post by Childnurse »

mike.perry wrote:Rear hanger in front end of rear boot "box section". Front hanger where floor slopes upwards under the back seat.
Support the front pipe with a jack in front of the silencer and wind up and adjust fit on manifold pipe then fit clamp
Thank you very much. That was very helpful and I got the the exhaust system back together this afternoon.

Next stop... electrics.
Post Reply