Not turning over

Discuss mechanical problems here.
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
Post Reply
LoopyLou
Newbie
Posts: 2
Joined: Mon Jul 13, 2015 12:21 pm
MMOC Member: No

Not turning over

Post by LoopyLou »

Hi - have been using my 1964 Morris for my daily commute to work with no problems. Parked up the other evening as usual and the following morning there was absolutely no noise at all when pulling starter. Presumably something has come unattached but nothing obvious when looking at engine. Any suggestions?
kennatt
Minor Legend
Posts: 2625
Joined: Fri Feb 02, 2007 9:11 pm
MMOC Member: No

Re: Not turning over

Post by kennatt »

flat battery?
bmcecosse
Minor Maniac
Posts: 46561
Joined: Wed Feb 16, 2005 11:24 pm
Location: ML9
MMOC Member: No

Re: Not turning over

Post by bmcecosse »

Lights left on. Charge the battery - or start it on the handle.
ImageImage
Image
SteveClem
Minor Legend
Posts: 1904
Joined: Sun Jul 03, 2011 11:37 am
Location: Near Belper
MMOC Member: Yes

Re: Not turning over

Post by SteveClem »

A booster battery is handy for these odd emergencies. Makes you popular at the local car show as well because there's always one or two that don't want to go home without a fight.
LoopyLou
Newbie
Posts: 2
Joined: Mon Jul 13, 2015 12:21 pm
MMOC Member: No

Re: Not turning over

Post by LoopyLou »

Thanks all. Not battery as lights still working and no luck with booster. Will attemp to start with handle at weekend.
whyperion
Minor Fan
Posts: 331
Joined: Thu Jun 11, 2009 5:01 pm
Location: S W London
MMOC Member: No

Re: Not turning over

Post by whyperion »

See other starter pull switch thread for ideas
bmcecosse
Minor Maniac
Posts: 46561
Joined: Wed Feb 16, 2005 11:24 pm
Location: ML9
MMOC Member: No

Re: Not turning over

Post by bmcecosse »

But do the lights go very dim when you pull the starter ? All the usual checks for stuck starter - rock in top gear/or turn the square on end of starter. If it's free - jump with lead direct from battery to starter - make sure NOT in gear, and probably best with Ign off initially at least to see if it works !
ImageImage
Image
Post Reply