I've bought a 1959 convertible and the ignition key doesn't fit the boot,the ignition key is FP and won't go into the lock,a FS key will,the number stamped on the bar is 924 so would I be right in thinking I need a FS924 key,any idea if any online suppliers sell them.Also the rubber boot stay clip is perished I don't suppose they make them,anyone any ideas.Does anyone have a spare series 2 clip I can use
Thanks
Boot lock and stay clip
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
mike.perry
- Series MM Registrar
- Posts: 10183
- Joined: Sun Jul 24, 2005 11:39 pm
- Location: Reading
- MMOC Member: No
Re: Boot lock and stay clip
The key should be available through most Minor parts suppliers or companies advertising on the net.
The same key should fit all the locks so maybe your boot lock has been changed
The same key should fit all the locks so maybe your boot lock has been changed
[sig]3580[/sig]
-
gtt1951
- Minor Addict
- Posts: 999
- Joined: Thu Oct 04, 2012 5:01 pm
- Location: Farnborough, Hampshire
- MMOC Member: Yes
Re: Boot lock and stay clip
Brian,
FS keys available from this eBay seller
http://www.ebay.co.uk/itm/Wilmot-Breede ... 58a5c5792d
and your "bar" number is within the range of numbers that he has got.
Or take a look at
http://www.ebay.co.uk/itm/Precut-Classi ... 0494419287
George.
FS keys available from this eBay seller
http://www.ebay.co.uk/itm/Wilmot-Breede ... 58a5c5792d
and your "bar" number is within the range of numbers that he has got.
Or take a look at
http://www.ebay.co.uk/itm/Precut-Classi ... 0494419287
George.
'50 Low-light with 918 Side-valve engine,
'51 High-light with Side-valve 918 engine,
'55 4-dr with 803 engine,
'56 Traveller with 1098 engine.
Re: Boot lock and stay clip
ESM sell the rubber block.