Is it likely buying a new unit will solve the problem..... and are they readily available?[frame]
Window
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
Window
You know the front small triangular window.... if you see from my photo, the bottom bit where it sits in the door frame is all rusted, and I think due to that it won't open.. plus the latch has been snapped
Is it likely buying a new unit will solve the problem..... and are they readily available?[frame]
[/frame]
Is it likely buying a new unit will solve the problem..... and are they readily available?[frame]
Re: Window
its a quarter light.
the frame should be ok as its stainless steel
you can buy new window rubber seals.
but not the window.
yours looks like its the hinge and pin that are rusted.
this is one .but doesn't say 2or 4 door
http://www.ebay.co.uk/itm/Morris-Minor- ... 4d24ad2c22
the frame should be ok as its stainless steel
you can buy new window rubber seals.
but not the window.
yours looks like its the hinge and pin that are rusted.
this is one .but doesn't say 2or 4 door
http://www.ebay.co.uk/itm/Morris-Minor- ... 4d24ad2c22
Re: Window
Is the hinge and pin replaceable??
Re: Window
Ah - can see you can get a new one here http://morrisminorspares.co.uk/shop/pro ... b170bd892d
-
- Minor Legend
- Posts: 1460
- Joined: Sun Sep 25, 2011 6:32 pm
- Location: Clacton On Sea, Essex, ENGLAND.
- MMOC Member: Yes
Re: Window
Part No. VNT119A from ESM is the lower bearing kit to replace the rusted one on your quarterlight. 

Re: Window
Next you will be telling me its easy to do too! 

-
- Minor Legend
- Posts: 1460
- Joined: Sun Sep 25, 2011 6:32 pm
- Location: Clacton On Sea, Essex, ENGLAND.
- MMOC Member: Yes
-
- Minor Fan
- Posts: 472
- Joined: Mon Nov 18, 2013 11:07 am
- Location: Oxfordshire
- MMOC Member: No
Re: Window
It can be done, I've just done a pair for mine. At least your frames are stanless. Mine are replacement frames so I did the job out of the car which is easier. Not sure if you can replace the bottom bush with the frame in the car anyway...posibly not 

Glad to be back!
Re: Window
Car off to have an MOT just to see whats up with anything.
I suspect both from door will hav ego come off , as the bottom is rusted through, the side panels look crappy and need replacing (I suspect for the second time in the cars life) so I will have ago - and if I totally screw up I know there is a classic car place in town who I could prep them for and they could do the tricky work!
Just waiting for the call from the garage to tell me all the things wrong they might discover!!!
I suspect both from door will hav ego come off , as the bottom is rusted through, the side panels look crappy and need replacing (I suspect for the second time in the cars life) so I will have ago - and if I totally screw up I know there is a classic car place in town who I could prep them for and they could do the tricky work!
Just waiting for the call from the garage to tell me all the things wrong they might discover!!!