FUEL PUMP

Discuss Electrical problems here.
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
Post Reply
samuria
Minor Legend
Posts: 1080
Joined: Tue Dec 08, 2009 9:28 pm
MMOC Member: No

FUEL PUMP

Post by samuria »

what is this pump off?
never seen one like this[frame]Image[/frame][frame]Image[/frame]

and it does'nt work :-?
bmcecosse
Minor Maniac
Posts: 46561
Joined: Wed Feb 16, 2005 11:24 pm
Location: ML9
MMOC Member: No

Re: FUEL PUMP

Post by bmcecosse »

Should be fine on a Minor....annoyingly - your picture has cut off the ID number (starting AU??????) on the little tag! Can you read it ?? Then check on the Burlen website......
ImageImage
Image
samuria
Minor Legend
Posts: 1080
Joined: Tue Dec 08, 2009 9:28 pm
MMOC Member: No

Re: FUEL PUMP

Post by samuria »

its aue150.... tried the site roy but i
had no joy
connected it up to battery and it just had a buzzing noise
its got twin points.
bmcecosse
Minor Maniac
Posts: 46561
Joined: Wed Feb 16, 2005 11:24 pm
Location: ML9
MMOC Member: No

Re: FUEL PUMP

Post by bmcecosse »

Hmmm - indeed no sign of AUE150 -are you sure about that number? Have you tried polarity both ways? What is the little cylinder - a capacitor?
ImageImage
Image
samuria
Minor Legend
Posts: 1080
Joined: Tue Dec 08, 2009 9:28 pm
MMOC Member: No

Re: FUEL PUMP

Post by samuria »

yes its a capacitor.
tried polarity both ways?
it did tick once when i lifted the points.
and they were clean,
tysonn
Minor Legend
Posts: 1326
Joined: Sat Nov 05, 2011 5:01 pm
Location: N.Yorks
MMOC Member: No

Re: FUEL PUMP

Post by tysonn »

Those are the type of unions I'm looking for.
MarkyB
Minor Maniac
Posts: 7845
Joined: Thu Jan 25, 2007 3:18 pm
Location: South East London
MMOC Member: No

Re: FUEL PUMP

Post by MarkyB »

I wonder if the colour might be a clue?
Marine application perhaps?

"Once you break something you will see how it was put together"
bmcecosse
Minor Maniac
Posts: 46561
Joined: Wed Feb 16, 2005 11:24 pm
Location: ML9
MMOC Member: No

Re: FUEL PUMP

Post by bmcecosse »

Just clean it up and adjust the points till it pumps! It will be fine !!
ImageImage
Image
Post Reply