Discuss Electrical problems here.
Forum rules
By using this site, you agree to our rules. Please see:
Terms of Use
samuria
Minor Legend
Posts: 1080 Joined: Tue Dec 08, 2009 9:28 pm
MMOC Member: No
Post
by samuria » Wed Mar 19, 2014 11:26 am
what is this pump off?
never seen one like this[frame]
[/frame][frame]
[/frame]
and it does'nt work
bmcecosse
Minor Maniac
Posts: 46561 Joined: Wed Feb 16, 2005 11:24 pm
Location: ML9
MMOC Member: No
Post
by bmcecosse » Wed Mar 19, 2014 8:13 pm
Should be fine on a Minor....annoyingly - your picture has cut off the ID number (starting AU??????) on the little tag! Can you read it ?? Then check on the Burlen website......
samuria
Minor Legend
Posts: 1080 Joined: Tue Dec 08, 2009 9:28 pm
MMOC Member: No
Post
by samuria » Wed Mar 19, 2014 8:55 pm
its aue150.... tried the site roy but i
had no joy
connected it up to battery and it just had a buzzing noise
its got twin points.
bmcecosse
Minor Maniac
Posts: 46561 Joined: Wed Feb 16, 2005 11:24 pm
Location: ML9
MMOC Member: No
Post
by bmcecosse » Wed Mar 19, 2014 10:01 pm
Hmmm - indeed no sign of AUE150 -are you sure about that number? Have you tried polarity both ways? What is the little cylinder - a capacitor?
samuria
Minor Legend
Posts: 1080 Joined: Tue Dec 08, 2009 9:28 pm
MMOC Member: No
Post
by samuria » Wed Mar 19, 2014 11:34 pm
yes its a capacitor.
tried polarity both ways?
it did tick once when i lifted the points.
and they were clean,
tysonn
Minor Legend
Posts: 1326 Joined: Sat Nov 05, 2011 5:01 pm
Location: N.Yorks
MMOC Member: No
Post
by tysonn » Thu Mar 20, 2014 6:48 am
Those are the type of unions I'm looking for.
MarkyB
Minor Maniac
Posts: 7845 Joined: Thu Jan 25, 2007 3:18 pm
Location: South East London
MMOC Member: No
Post
by MarkyB » Thu Mar 20, 2014 8:51 am
I wonder if the colour might be a clue?
Marine application perhaps?
"Once you break something you will see how it was put together"
bmcecosse
Minor Maniac
Posts: 46561 Joined: Wed Feb 16, 2005 11:24 pm
Location: ML9
MMOC Member: No
Post
by bmcecosse » Thu Mar 20, 2014 11:46 am
Just clean it up and adjust the points till it pumps! It will be fine !!