Hi I am trying to fit poly bushs intothe rear spring where it goes in the the front spring hanger on the body of the car and I just can not get then to go in. Can some one tell me an easy way to get them to fit. I had only put rubber bushs in 8 months ago and when I checked them them were already on the way out.
Thanks
How to fit poly bushes in to rear spring.
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
martinformorris
- Minor Friendly
- Posts: 20
- Joined: Mon Apr 11, 2011 6:05 pm
- MMOC Member: No
-
jagnut66
- Minor Legend
- Posts: 3703
- Joined: Fri Apr 11, 2008 7:28 pm
- Location: Mansfield, Nottinghamshire.
- MMOC Member: Yes
Re: How to fit poly bushes in to rear spring.
Hi,
I don't recall any problems fitting mine.
Can you post up some pictures of the problem area.
Best wishes,
Mike.
I don't recall any problems fitting mine.
Can you post up some pictures of the problem area.
Best wishes,
Mike.
1954 Series 2: 4 door: "Sally" -- Back on the ground with (slave) wheels, now being sprayed by me, slowly......
1970 Triumph Herald 1200: "Hetty" -- Driven back from Llangollen in Wales (twice.....)
1952 Morris Minor MM highlight with sidevalve engine still fitted, wants work, so joins the queue for now......
1970 Triumph Herald 1200: "Hetty" -- Driven back from Llangollen in Wales (twice.....)
1952 Morris Minor MM highlight with sidevalve engine still fitted, wants work, so joins the queue for now......
-
SUE482
- Minor Fan
- Posts: 293
- Joined: Mon Aug 09, 2010 11:20 pm
- Location: In the Middle
- MMOC Member: Yes
Re: How to fit poly bushes in to rear spring.
I sprayed the bushes with silicon grease and they just slipped into the spring.
Like this, hope it helps:
[frame]
[/frame]
[frame]
[/frame]
Like this, hope it helps:
[frame]
[frame]
Should be ready for tea time.
Re: How to fit poly bushes in to rear spring.
Should be straightforward -sure you have the correct bushes?
